Showing posts with label Crafty Foods. Show all posts
Showing posts with label Crafty Foods. Show all posts

Tuesday, November 10, 2015

Panda Bear Cupcakes

The Diva turned 8 in October. That means time for the great Cupcake Challenge. The Diva picks a theme and I have to come up with a brilliant cupcake to go with it.


Since we started the Cupcake Challenge, we have had:
2011: Tinkerbell
2013: Puppies. I forfeited this one and we bought a bakery cake. I know.
2014: Frozen. I did make cupcakes but they were so lame that they weren't even picture worthy. Just picture a blue cupcake, a pile of white frosting with a single large shimmery purple gumball placed on top. The kids loved it - cake! gum! - but it just wasn't Challenge worthy.


So 2015 was the tie breaker year. I knew it was going to be hard. I knew in her little evil Diva heart, she was going to stump me.


She was so close. I literally put the plan together the day before the party.


My inspiration cupcakes were here, but they were mini cupcakes. I knew I was going to have to think bigger to pull it off. Well, here's what I came up with.


I love them. The Diva loved them. And they were so easy. Seriously, from cake mixing to finished decorating was an hour. There are a few things I would change and they are noted here.


2015 Cupcake Challenge success! The losing streak is over!


24 cupcakes, 2 cups mini Oreos, 1 bag M&Ms, 1 bag mini baking Kisses, 1 tub frosting (see notes below), 1 bottle sanding sugar, and 1 fine-tip tube black frosting (see notes below).
Frost cupcakes and dip into sanding sugar.
Split Oreos and place in eye positions.
Secure brown M&M's to Oreo cookie.
Place Hershey Kisses for ears and nose. Add mouth with black frosting (not shown).
Tools:
Large frosting tip (optional) and frosting bag


Supplies:
24 baked cupcakes (I used a confetti cake mix and dressed it up with milk and real butter)
1 tub vanilla / white frosting [hindsight: I would make a large batch of homemade, or use 2 tubs]
2-4 TBSP powdered sugar (optional)
White sanding sugar
mini Oreos (I used about 1-1/2 "To Go Cups" shown here)
M&M's - you only need the brown ones. I had barely [heh] enough from one bag
Mini Hershey Kisses - I found these in the baking aisle, bonus that they came unwrapped!
Black gel frosting [hindsight: use chocolate or black non-gel next time. within a few hours the gel frosting had started to bleed into the sugar crystals so our pandas had cute little beards]


Assembly:
If using tub frosting, I recommend mixing it up with 2 TBSP powdered sugar per tub. This stiffens up the frosting so that it holds to the cupcake a bit better. If using homemade, make sure frosting is nice and stiff.


Frost cupcakes. I used a large Wilton 2A tip, but you can just plop it on with a spoon. It isn't going to matter how it looks as long as it covers the entire cupcake. Notice that some of mine are not completely covered as I was running out of frosting, and I only have 22 cupcakes as a result.


This next part is kind of scary the first time you do it, but trust me, it's easy. Pour the white sanding sugar into a shallow wide mouthed bowl. Invert frosted cupcake and gently press into the sugar. This will smooth out your frosting and make your panda sparkley. (Trust me, Divas looooove sparkley!)


Place two frosting dots (I used the black gel because I was out of white) towards the top of the cupcake. Split two mini Oreos, keeping the frosted half and placing it on the frosting dot. Place another frosting dot on each Oreo frosting and place a brown M&M. See what you did there? You just made Panda eyes! For fun I made the eyes looking in different directions - up, down, cross-eyed, you get the idea.


Take two mini Hershey Kisses, turn them so that the flat side is up. Press them into the side of the cupcake above the eyes (at about 1 & 11 o'clock) to make panda ears. Take one Hershey Kiss on its side with the flat side towards the eyes and the pointy side towards the bottom of the face. It's a perfect chocolate bear nose - yummy!


Using the black / chocolate frosting, make a swoopy "W" shape for the mouth. Make sure the middle of the "W" is longer and goes up to the point of the nose.


And that is how you win a panda bear cupcake challenge!







Friday, May 22, 2015

Candy Bouquets

So here's the deal: I went to India for 10 days. While I was gone I missed two birthday parties, Mother's Day, three high school graduations, and a baby shower. It's probably better that I wasn't here because I don't know how I would have been in all those places at once.

I needed something quick, cute, and original for gifts. Well, my candy bouquets wound up being semi-original. I combined two ideas I saw on Pinterest and made it work for me. These go together pretty quick, are ridiculously addictive to make, and I think they're super cute!




One foam block, and two sizes of craft sticks.

Glue large candy bars and box candies to each side of the block.

Use a green marker to color the craft sticks. (Best.Assistant.Ever.)

Use stencils to trace flower and leaf shapes onto cardstock.

I used the flower and heart shapes on this stencil.

After cutting out leaves, don't forget to add veins!

Glue the leaves to the sticks in varying directions.

Glue candies on to flower cardstock.
Glue craft sticks onto flowers at varying heights.



Insert longest flower into the back of the block.







Insert the medium length next.


And finally the shortest flower in front.


Here's what you need to make your own!
Tools:
Serrated knife (for trimming the foam block)
Low temp glue gun and lots of sticks
Green marker
Stencils
Pencil
Scissors

Supplies:
Rectangle foam block 2.4 x 2.9 x 7.8 inches
2 Large craft sticks
1 Small craft stick
colored card stock (I used green and cream colored)
2 box candies
2 large chocolate bars
21 candy pieces

Foam block:
Using a serrated knife, I trimmed my foam block to be slightly shorter than my shortest base candy. In my case it was the chocolate bars. Then I glued the chocolate bars on to the longer side of the rectangle. I had glued one accidentally on the short side and discovered that the candy boxes won't fit against the base when done that way. After both bars were glued on, I glued on the candy boxes. I found it was easiest to apply the glue to the block, set the block up to standing, and align the bar or box before actually pressing it into the glue. Once it's in the glue, there's only a second of wiggle room.

Flower:
Use a green marker to color the craft sticks. You could paint them, but the marker was just as quick and didn't require drying time. Use a stencil to trace and cut out the flower and leaf shapes. I used Fiskars ShapeXpress templates with a flower shape and a curvy heart shape that worked perfect for leaves. You could use just a circle for the flower and hand cut a leaf - I had neither the patience or scissors skills to freehand it! Glue the candy pieces onto the flower, glue the flower and leaves to the craft stick. I did mine at varying heights in the bouquet.
Assembly:
Stick the assembled flowers into the foam block - I angled them slightly so that they had more of a "natural" look to them. If you wanted to you could take some irish moss and use to cover the top surface of the foam block and give it more of a finished look. I didn't due to lack of time and material.





Monday, December 10, 2012

The Diva's Butterfly Cupcakes


In case anyone has noticed and is wondering: Yes, The Spawn does have birthdays too, but with the exception of the makeup-for-being-a-bad-mom-chess-cake, he prefers very simple vanilla on vanilla cakes. For which I do have an awesome vanilla cake recipe that I will post for his next birthday, I promise... Now, on to The Diva's birthday cupcakes from like,  two months ago... These adorable butterflies came about from the combination of two Pinterest ideas and a little bit of "what I already have in my cupboards". I apologize in advance for the lack of thorough How To photos... I might have gotten bored halfway through making these...

What you need:
24 baked and frosted cupcakes, your flavor choices
48 tiny twist pretzels
pull and peel twizzlers, pulled apart and cut to 24 pieces (I eyeballed it, but approximately 3" long) flavor/color of choice
24 tootsie rolls flavored or plain and cut in half lengthwise
96 M&M's in color matching sets of 4 (or if you want to do whatever, do whatever.
Melted almond bark. I used white and chocolate separately.
wax paper

Here's what you do:
Spread a long piece of wax paper out on the counter. The assembled butterflies take a bit to set up to be moveable so you'll need space to do a lot of them. I found it better to completely assemble each butterfly before moving on to the next one. Place two pretzels with the wide end together as shown in the photo above.

Fill pretzel space with melted almond bark as shown. You'll want to spoon a good amount across the center to help secure the butterfly antennae and body.

Fold twizzler in half and place fold at the top center of pretzel. This is the antennae. (Did I need to tell you that? I really just like typing "antennae"...) They should spring open on their own. If they don't, then give them a little nudge with your fingertip after you place the body.

[Insert epic fail for lack of pictures, here] Place one cut tootsie roll in the center of the pretzels, cutside down and covering the twizzler bend.

Place one M&M in each section of the wing. I tried to place mine without the "m" showing.

Allow to harden completely (about half an hour depending on the kitchen temp) before placing on top of cupcakes.

These keep well for about two days. After that the tootsie rolls and twizzlers will start to goop up [sorry for the techinical term] due to the moisture in the frosting.

Monday, October 24, 2011

Juice Box Robots

So... I thought I was being completely original. Actually, my intention was to make juice box and a candy grab bag for The Diva's birthday party at daycare... but then I wondered if I could make Tinkerbell juice boxes... and then my experimenting led to me thinking "these look more like robots" so then I talked to my best friend Google... and yeah. Not so original idea. But I did find a lot of ideas to make my not-so-original idea better. My favorite was found at My Insanity - I really liked the combination of chocolate and chewy candies, and the dots for eyes really made them cute. I left mine with their original packaging showing because 1) I'm lazy and b) it reminds me of the Lifesaver trains my mom used to make at Christmas (which reminds me, I should figure out how to do those...) These were a super-quick twenty minute project and the daycare kids loved them!

Here's what I used:
12 mini juice boxes (4oz. size) I bought these in packs of 4 at the dollar store in apple and fruit punch flavors
24 Hershey's milk chocolate nuggets
24 Laffy Taffys
24 Starbursts
24 mini dot labels I found these in the office supply aisle at Wal-Mart.

You'll also need a hot glue gun! I have a low temp one so the kids can help me when I tackle projects like this.

Glue two Starbursts to the bottom of the juice box for feet. I didn't worry too much about matching these, but next time I will take the time to match the feet and the arms. There were a few boxes that I had to play with to get to balance just right so they would still stand (there was one that I actually had to glue a third foot onto) but for the most part they all balanced perfectly after the feet were added.

Glue two Laffy Taffy on each side of juice box for arms. I did take the time to match these on each robot.

Glue two Nuggets with flat sides together. Glue to top of juice box to make the head.

Attach two mini dot labels to head for eyes (remember that the straw is the back of the robot body so you want the eyes to be facing the front).

Voila! I really like the varieties that Kendra came up with - different shapes for heads, Rolos for feet - but I think I'll stay away from the Pez arms. (Not because I don't like Pez, I just like Pez when it comes out of the Pez dispenser :) It's fun!)

Sunday, October 23, 2011

Tinkerbell Cupcakes

While I was planning The Spawn's birthday cake, The Diva looked at me and said: I want Tinkerbell for my birthday. Seven months later, I managed to deliver Tinkerbell.


What you need:
12 cupcakes (I made mine from a white cake mix)
1 can vanilla frosting
1 small tube black decorating icing
1 small tube red decorating icing
yellow food coloring (I recommend AmeriColor made especially for baking)
36 sticks Juicy Fruit gum
12 vanilla wafers
12 green fruit chews (I used Jolly Ranchers)
You'll also need a rolling pin (or a smooth glass works too), a sharp knife for cutting the wings and dress fringe as well as a piping bag and writing tip for adding the hair.

Cut 24 small wings from 12 pieces of the gum. I did this by folding each piece in half and cutting two at a time. If I did this again I would do them individually for a smoother cut. I discovered when I did the larger wings that single sticks of gum cut much smoother.

Cut 24 larger wings from the remaining 24 pieces of gum.

Microwave the green Jolly Rancher fruit chews for no more than 3 seconds each to soften. Flatten each fruit chew and roll out on a clean work surface. Cut little notches in the bottom of each fruit chew to make the dress fringe.

Add enough yellow food coloring to 1/4 cup of the vanilla frosting to tint it yellow. Spoon the yellow frosting into a resealable bag.

Add food coloring to the remaining vanilla frosting to tint it your color of choice. I baked my cupcakes in these super cute (and expensive!) flower shaped cupcake papers. Because the papers were purple, I choose to do the background frosting in purple but you can do it in any color you want (or no color at all).

Spread each cupcake with background frosting and make smooth.

Arrange the green fruit chew dress on the lower half of a cupcake.

Place 2 large wings and 2 small wings on the top third of cupcake.

Pipe a line of frosting on the bottom half of the BACK of the vanilla wafer. Attach the whole vanilla wafer on top for the fairy's head.

 Using the yellow frosting, pipe some hair and a bun with the yellow frosting as pictured. Because I am not very good with frosting, I kept it simple by drawing a semi-circle partway down the wafer (leaving just enough room to make the swirly dot for a bun at the top) and filled in with three or four lines for bangs. A few of the cupcakes actually wound up looking like they had mini suns perched on their head, but for the most part this technique worked.

Pipe the eyes with the black decorating icing.

Pipe a smile with red decorating icing. I actually had a vision of using some little cake decorating doo-dad for a mouth, but couldn't find anything that worked.

I had also thought to cut wafers for arms and legs, but really, the winds, head and dress were enough. The Diva knew instantly that mom had made her Tinkerbell cupcakes. She absolutely loved them!

Another note about these cupcakes, they do not store well so I wouldn't make them any longer than one day in advance. And really, it only took me about an hour to frost, shape and assemble the cupcakes, so it's very easy to do the day of the party - unless you're also in the middle of painting your kitchen, making a taco bar for 25 people, making a second cake and trying to clean your house. Then by all means, make them the day before. (By day three, the wafers had turned mushy, the gum was wilted and the fruit chew had melted. You've been warned.)

Book Review: Shadow Baby by Alison McGhee

 Finished August 4, 2020 Book 11 of 20 Shadow Baby by Alison McGhee My rating: 1 of 5 stars I'm leaving this one unfinished, about h...